Pressure Regulator

pressure regulator Admin Edit

Place of Origin:	Zhejiang, China (Mainland)
Production Capacity:	10000 Piece/Pieces per...
Packing:	According to...
Delivery Date:	15 --20 days
Pressure Regulating Range:	0.05-0.25,0.05-0.63
Weight:	0.135
Ambient Temperature:	5-60℃

Maximum Working Pressure:	1.0MPa

XR4 Pressure Reducer

Order NO.	XR4
Pressure Regulating Range(MPa)	0.05-0.25,0.05-0.63
Weight(Kg)	0.135
Ambient Temperature	5-60℃
Maximum Working Pressure	1.0MPa

Characteristic
Curve Of Flow Rate

Ensured Pressure Resistance	1.5MPa(15kgf/cm²)
Highest Working Pressure	1.0MPa(10kgf/cm²)
*Pressure Regulating Range	AR1000:0.05-0.7 MPa(0.51-7kgf/cm2) AR:2000-5000:0.05-0.85 MPa(0.51-8.5kgf/cm2)
Ambient and Fluid Temperature	5-60℃
Valve Type	With Overflow

Pressure Regulating Range:0.02-0.2Mpa(0.2-2kgf/cm²)

Model	Specifications				Accessories
	*Rated Flow (L/min)	Port Size)	Pressure Gauge Size(G)	Weight (kg)	Bracket	Pressure Gauge
AR1000-M5	100	M5	1/16	0.08	B120	G27-10-R1
AR2000-01	550	1/8	1/8	0.27	B220	G36-10-01
AR2000-02		1/4
AR2500-02	2000	1/4	1/8	0.27	B220	G36-10-01
AR2500-03		3/8
AR3000-02	2500	1/4	1/8	0.41	B320
AR3000-03		3/8
AR4000-03	6000	3/8	1/4	0.84	B420	G46-10-02
AR4000-04		1/2
AR4000-06	6000	3/4	1/4	0.94
AR5000-06	8000	3/4	1/4	1.19
AR5000-10		1

* Under the circumstance that the supply pressure is 0.7Mpa(7.1kgf/cn²)and set pressure is 0.5Mpa(5.1kgf/cm²).

Special Instruction

1\For the air filters, filter regulators and lubricators which water bowls, oil bowls and oil windows are made of polycarbonate:

1) They can not be used in the medium or circumstance below:

Acid (hydrochloric acid, vitriol, phosphate, chromate), Alkali (Sodium hydroxide, Potassium hydroxide, autunite hydroxide, ammonia, sodium carbonate), Inorganic salt ( sulfureted sodium, Niter, Glauber's salt).Chlorin impregnant (tetrachloride, chloroform, chloridize ethane, chloridize methylene),Aromaticity(Benzene,cycloparaffin,enol).Ketone(Acetone, butyltone).Alcohol(alcohol, carbinol),oil(gas, coal oil, alkalescence water-solubility cutting liquid),Ester,Aether,Amine,Screw encapsulant,seawater.

2\In order to avoid too much pressure fall, the outlet pressure should be controlled lower than 85% of inlet.

3\If the air flow is not enough, the lubricator will not drop the oil. So the air flow of the lubricator must be satisfied for the oil drop requirement.

4\The oil of the lubricator must be Turbine No.1 Oil ISOVG32.The components will be destroyed if you use another kind of oil.